How do change front brake pads? - changing brake pads gm
Change 93 F150 2-drive, front brake pads, remove them as the clip, it seems that V-shaped pins, I do not see the screws, as a GM in the celebration of the sole. These needles from knowcked or what is the procedure to replace the rotors and PDS
Thanks
Sunday, January 24, 2010
Changing Brake Pads Gm How Do Change Front Brake Pads?
7 comments:
Detailed instructions with photos can be found here:
http://www.autozone.com/servlet/UiBroker ...
Destroy the pin 2 of the caliper, remove the caliper, pushing the piston back, you change the brake pads, install the clip, press the 2-pin back
Take a pair of pliers and pull together the screw, while the hammer. It would be useful to inject a bit before WD.
Knock Out Pins and then reverse the procedure to install the new pins can reuse the old bolts, but why ...... Risk
Knock Out Pins and then reverse the procedure to install the new pins can reuse the old bolts, but why ...... Risk
a hammer and something that can enforce. Bang only with a hammer and a screwdriver and wide is what I am on my F150 only 91 and wiggle and pull the clip used ..... Make U-open the clip with a large C clamp so that when the new pads are installed or will be recovered through the rotor. If you just press the clip back through the holes back to the front, where they originally
a hammer and something that can enforce. Bang only with a hammer and a screwdriver and wide is what I am on my F150 only 91 and wiggle and pull the clip used ..... Make U-open the clip with a large C clamp so that when the new pads are installed or will be recovered through the rotor. If you just press the clip back through the holes back to the front, where they originally
Post a Comment